Nitek

800-528-4343 | 847-259-8900
TT560 - Nitek
Image
TT560

TT560

The TT560 Active Long Range UTP Video Balun Transmitter is designed for longer range live video operation over twisted pair category cables.The TT560 requires a Nitek active TR560 or Series 56 Active Receiver unit.

Product Description

The TT560 Active Long Range UTP Video Balun Transmitter is designed for longer range live video operation over twisted pair category cables.The TT560 requires a Nitek active TR560 or Series 56 Active Receiver unit. The units work equally well over existing communication and computer network spare pairs, or new cable installations. A highly balanced transmitter output design assures that the system will not interfere with other equipment on the network. In addition, the transmitter is virtually impervious to ground loop and has high immunity to noise and interference from other signals. Built-in surge suppression is standard.

A dip switch on the unit provides precise adjustment of gain and frequency compensation, allowing the system to be fine-tuned for any cable.

Features

• Active electronics compensate for frequency and level loss
• Built-in protection from power surges, transients, static or other electrical interference
• High resolution color or monochrome video
• Immunity to ground loop; video and AC can be run in a common raceway, where allowed
• Video can be run in the same cable with telephone and computer signals
• Weather resistant design
• Easy to install

Tech Specs

Size 1.6″H x 4.3″W x 2.4″D
Power Requirements 12 to 24 VAC or VDC @ 300mA

 

(wall transformer provided with unit)

Output Balanced low voltage current loop
Input 1 vpp composite video
monochrome or color
Common Mode Rejection >70dB

 

(with TR560 receiver)

Video Format RS170, NTSC, PAL, SECAM, CCIR (Color or B/W)
Operating Frequency DC to 10 MHz
Recommended

 

Transmission Distance

Up to 6,000 feet (1,800 meters) for both monochrome and color
Temperature Range -40 degrees C to +85 degrees C
Humidity Range 0 to 98%, non-condensing
Enclosure Material Black ABS flame retardant

 

plastic

Twisted Pair
Connection
Screw terminals
Shipping Weight 2 lbs
Wire Spec 26 to 12 AWG Unshielded
Twisted Pair (UTP)
DC Loop Resistance 51 Ohms/1,000 feet (max)
(51 Ohms/300 meters)
Normal Capacitance 17pF/ft.
Impedence 100 Ohms +/- 20%
UTP Category 2 or better

Downloads

TT560 Specification Sheet Last Updated: September 14, 2017
TT560 Installation Manual Last Updated: September 14, 2017
TT560 A&E Specification Last Updated: September 14, 2017