TR515X8
The TR515x8 is designed for use with the modular rack system. The system holds modular cards in any combination, using the VH3200 card cage (not included). This modular plug-in feature allows the system to be custom configured for each application and provides easy expandability.
- Last Updated: September 14, 2017TR515X8 Specification Sheet
- Last Updated: September 14, 2017TR515X8 Installation Manual
• Active electronics compensate for frequency and level loss
• Built-in protection from power surge, transients, static or other electrical interference
• High resolution color or monochrome video
• Complete immunity to ground loop; video and AC can be run in a common raceway, where code allows
• Video detect LEDs for each receiver
| Transceiver Unit | |
| Size | 1.6″ (H) x 4.3″ (W) x 2.5″ (D) |
| Power Requirements | Card powered by VH32000 |
| Input Connection | 1 Vpp composite video Monochrome or Color |
| Video Format | RS170, NTSC, PAL, SECAM, CCIR (Color or B/W) |
| Connection Type | Screw terminals or RJ45 modular connector |
| Common Mode Rejection | >70dB |
| Operating Frequency | DC to 10 MHz |
| Wire Size | 26 to 18 AWG twisted pair |
| DC Loop Resistance | 51 Ohms/1,000 ft (max) |
| Nominal Capacitance | 17pf/ft |
| Impedance | 100 Ohms +/-20% |
| Cable Category | 2 or better |
| Temperature Range | -20C to +65C |
| Humidity Range | 0 to 98% non-condensing |
- Last Updated: September 14, 2017TR515X8 Specification Sheet
- Last Updated: September 14, 2017TR515X8 Installation Manual