MS-100 Single Channel 10/100 Media Converter for Single-mode Fiber


MS-100 Single Channel 10/100 Media Converter for Single-mode Fiber
The MS-100 is a single channel converter designed to convert 10/100BASE-TX UTP based electrical ethernet to optical 100BASE-FX. It extends networks up to 20km over duplex SC single-mode fiber. Setup is easy and transparent to the network.


• Industry’s smallest miniature design
• 1 x 10/100 (Fast Ethernet) RJ45 Network port
• 1 x 100BASE-LX SC duplex single-mode port
• Converts copper 10/100 Ethernet signals to optical to extend past standard cable limits
• Compliant with IEEE802.3 standards
• Autosensing MDI/MDIX crossover on network port
• LED indicators for network signals, link status and power
• Made in the U.S.A.

Technical Specs 
 Unit Specifications
Network Port RJ45 Connector
Optical Port Duplex SC 1310nm for use with single-mode fiber
Ethernet 10/100Mb on copper port, full or half duplex
Ethernet on Optical Link 100Mb full duplex
Max operating distance electrical up to 100m / 330ft on Network Port (10/100 copper)
Max operating distance optical up to 20km / 12.5mi using SC duplex single-mode 9um fiber
LED Indicator Orange/Green Flashing LED for 10/100BASE Electrical link and activity
Green/Flashing LED for optical link and activity
Green LED for Power
Optical Wavelenght 1310nm
Optical Launch Power -3dBm (max) to -9dBm (min)
Minimum Receiver Sensitivity -32dBm @ 1x10E-10 BER
Receiver Overload Power -3dBm
Minimum Optical Budget 23dB
Rating/Listings IEC/UL62368-1
Rating/Listings NEMA TS-2
Operating Temperature Commercial 0C to 50C / 32F to +122F
Humidity Up to 95% non-condensing
System Latency <1mS
Power Requirement 6-15V DC/8-18V AC (12V DC recommended)
Power used 2 Watts
BTU Rating 6.8BTU/hr
Shipping Weight 0.45kg / 1lb
Shipping Size (HxDxW) 64mm x 133mm x 189mm / 2.5” x 5.25” x 7.45”