800-528-4343

PoE48

The POE48 series 4 channel PoE crossover and power insertion card is designed for use with the CX254 and the CX452 modular card cage (purchase separately).
The POE48 crossover and power insertion card is a unique component of the UTP Links system.

Description 

The POE48 series 4 channel PoE crossover and power insertion card is designed for use with the CX254 and the CX452 modular card cage (purchase separately). The POE48 crossover and power insertion card is a unique component of the UTP Links system. The POE48 card can provide power for up to four PoE devices. The POE48 also provides the means to connect the four IP devices to a network device; i.e. hub, switch, etc. Up to five POE48 cards may be plugged into a CX254 or the CX452 chassis to power a total of twenty devices, in any combination. In this way the UTP Links system may be used to power and crossover both IP and standard analog devices in the same structured cabling network. The CX254 and the CX452 are 1 RU card cages (purchase separately).

Features 

• The POE48 can be used in a combined system with standard UTP Links Plug-in cards
• Provides four separately fused outputs
• Interfaces with standard network devices
• Plug-in cards also provide future system ease of moves, adds and changes
• Detection LED’s for power
• Compatible with TIA/EIA 568A or 568B
• One CAT 5 or better cable per camera drop
• Made in the U.S.A.

Technical Specs 
 Unit Specifications
Size 1 horizontal card slot
(5 slots total CX452 card cage)
Power Requirements Supplied by
PS115 power supply
Power Output 48VDC @ 15.4 WATTS/PORT
Twisted Pair Connection
(vertical runs)
RJ45 connector
Twisted Pair Connection
(horizontal runs)
RJ45 connector
UTP Cable Category 5 or better
Temperature Range 0 degrees C to +55 degrees C
Humidity Range 0 to 95%, non-condensing
Shipping Weight 1 lbs

RJ45 Connector “To Camera”
(Horizontal Run)

Pin
Color Code
Signal
1
WHT/ORG
Transmit (video) +
2
ORG/WHT
Transmit (video) –
3
WHT/GRN
Receive +
4
BLU/WHT
VDC +
5
WHT/BLU
VDC +
6
GRN/WHT
Receive –
7
WHT/BRN
VDC –
8
BRN/WHT
VDC –

 

RJ45 Connector “To Network”
(IP Interface)
Pin
Color Code
Signal
1
WHT/ORG
Transmit (video) +
2
ORG/WHT
Transmit (video) –
3
WHT/GRN
Receive +
4
BLU/WHT
VDC +
5
WHT/BLU
VDC +
6
GRN/WHT
Receive –
7
WHT/BRN
VDC –
8
BRN/WHT
VDC –
Downloads