ER8500CB

Nitek's Offshore, Oil & Gas Solution ER8500CB is an active Network 8 port receiver extender, 500 meter PoE over coax NO PoE and power distribution + Switch over COAX

Description 

The ER8500CB is another component of Nitek’s cutting edge Etherstretch™ line. Our Etherstretch™ solution allows for the utilization of existing coax cable infrastructure to transmit data from IP cameras and other network devices over the given wire media.
The ER8500CB is a multi-port Ethernet switch for IP video cameras. This Layer 2 switch with a Gigabit LAN connection operates as a standard switch for all Ethernet devices up to 100 meters but when used in conjunction with the ET1500CB transmitter unit (sold separately) operating distances can be extended up to 500 meters (1.640 feet). This makes it ideal for mixed use applications where equipment can be both under 100 meters or up to 500 meters. Being a fully functioning Layer 2 switch it easily integrates into standard network infrastructure.

The ER8500CB receiver and ET1500CB transmitter require very little installation time and absolutely no set up or configuration. The system is completely transparent to the network with no IP or MAC addressing required. Simply connect a network device to the transmitter. LED connectivity indicators on the receiver show the status of network communication. The ER8500CB Etherstretch™ network extender overcomes cable distance limitations inherent in traditional networking topologies and provides a viable alternative to fiber or wireless transmission solutions.

Features 

• Transmits IP data up to distances of 500 meters (1,640 ft)
• Rack mounted multi-channel (8 channels) Etherstretch solution
• Gigabit LAN network connectivity
• Supports 10/100 over RG59 coax cable
• Supports mega-pixel technology
• No PoE and power distribution
• Fully transparent to the network
• Supports any network device, including IP cameras
• Easy to install, no set up required
• No MAC or IP addressing required
• LED indicators for network signals, link status and power
• Short circuit, over current and over voltage protection
• Surge protected inputs
• Ground loop isolation
• Made in the U.S.A.

Technical Specs 
Network Port RJ45 Connector, 1 Gb
Link Port 8 BNC Connectors
Ethernet 100BASE-TX full duplex
LED Connectivity Indicator Link Status, Power, 10/100/1000Mb
Max Operating Distance 500m / 1,640ft
Power Requirement IEC380 connector – 110-240VAC/50-60Hz/20Watt Max
Power Output No PoE out
Operating Temperature 0C to 52C / 32F to 125F
BTU Rating 68BTU/hr
Humidity Up to 95% non-condensing
Dimensions 1 RU x 305mm / 1 RU x 12.0”D
Mounting Standard rack mounting
Shipping Dimensions 216mm x 457mm x 610mm / 8.5” x 18” x 24”
Shipping Weight 5,5kg / 12lbs
Downloads