Nitek

800-528-4343 | 847-259-8900
EX560 - Nitek
Image
EX560

EX560

The EX560 is a complete twisted pair long range video transmission system made up of a TR560 receiver unit and a TT560 transmitter unit. The system is designed to operate over Category 2 or better twisted pair cable and will transmit over a range of 150 meter to 1800 meters (492 to 5900 feet) of UTP cable.

Product Description

The EX560 is a complete twisted pair long range video transmission system made up of a TR560 receiver unit and a TT560 transmitter unit. The system is designed to operate over Category 2 or better twisted pair cable and will transmit over a range of 150 meter to 1800 meters (492 to 5900 feet) of UTP cable. It works well over existing communication, computer network spare pairs, or new cable installations. A highly balanced transmitter output assures that the system will not interfere with other network equipment. Advanced receiver and transmitter electronics provide optimum video quality and complete immunity from ground loop, hum and noise. Both the transmitter and receiver provide adjustment for gain and frequency compensation allowing the system to be fine-tuned for the cable. These unique adjustments provide optimum performance over the entire operating range of the system and allow cable lengths to be estimated with a wide safety margin. The receiver and transmitter units each require 24 VAC power. In multiple receiver and/or transmitter applications a common supply can be used for the system.

Features

• Active electronics compensate for frequency and level loss
• Built-in protection from power surges, transients, static or other electrical interference
• High resolution color or monochrome video
• Immunity to ground loop; video and AC can be run in a common raceway, where allowed
• Video can be run in the same cable with telephone and computer signals
• Weather resistant design
• Easy to install

Tech Specs

Size 1.6” (H) x 4.30” (W) x
2.4” (D)
Power Requirements 12-24VDC/VAC @ 100mA RX
12-24VDC/VAC @ 300mA TX
Input Balanced low voltage current loop
Output 1 vpp composite video

 

Monochrome or Color

Common Mode Rejection >70dB
Wire Spec 26 to 12 AWG Unshielded
Twisted Pair (UTP)
DC Loop Resistance 51 Ohms/1,000 feet (max)
(51 Ohms/300 meters)
Normal Capacitance 17pF/ft.
Impedence 100 Ohms +/- 20%
UTP Category 2 or better

Downloads

EX560 Specification Sheet Last Updated: September 14, 2017
EX560 Installation Manual Last Updated: September 14, 2017
EX560 A&E Specification Last Updated: April 19, 2018