800-528-4343

ET4500U

The ET4500U is another component of the Nitek cutting edge Etherstretch™ line. This Environmentally Hardened Etherstretch solution allows for the utilization of existing or the installation of new Category communication (UTP) cabling. With the addition of an external power supply, this transmitter can supply PoE power to operate 4 IP cameras or other network devices. The unit transmits data from the 4 IP network devices over the four pair UTP cable for distances up to 600 meters (1968 feet).

Description 

The ET4500U is another component of the Nitek cutting edge Etherstretch™ line. This Environmentally Hardened Etherstretch solution allows for the utilization of existing or the installation of new Category communication (UTP) cabling. With the addition of an external power supply, this transmitter can supply PoE power to operate 4 IP cameras or other network devices. The unit transmits data from the 4 IP network devices over the four pair UTP cable for distances up to 600 meters (1968 feet). The ET4500U is a 4 port transmitter which can work with any of the Nitek multichannel UTP Etherstretch receivers requiring very little installation time and absolutely no set up or configuration. These units quickly turn ordinary UTP cable into a high speed network communication pathway. The ET4500U is transparent to the network thus requiring no IP and MAC addressing. Simply connect your network devices to the IP Ports of the transmitter, connect the transmitter to an Etherstretch branded UTP receiver and the system begins communicating. LED indicators show the status of network communication and PoE power. The ET4500U requires no network settings to be changed or adjusted.
The Nitek Etherstretch™ ET4500U extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow. The ET4500U is ideal for retrofitting existing installations. The units are constructed of industrial grade RoHS compliant plated aluminium which is finished with a corrosion resistant finish making it very durable.

Features 

• Environmentally hardened
• Supports 10/100 and PoE over Category cables up to distances of 600 meters (1968 feet)
• Fully transparent to the network
• Supports 4 network devices, including mega-pixel technology IP cameras
• Easy to install, no set up required
• No MAC or IP addressing required
• LED indicators for network signals, link status and power
• 50 Watt power supply can insert PoE power for non-PoE switches
• Surge protected inputs
• Ground loop isolation
• Made in the U.S.A.

Technical Specs 
 Transceiver Unit
Size 1.0” x 4.0” x 4.3” including tabs (26 x 102 x 109mm)
Power Requirements 48 to 56Vdc, 1 to 5A Nitek PS48 Power Supply Included
Ethernet Connection [4] Auto Configuring 100BASE-TX Full Duplex
EtherStretch Link Connection [1] Auto Configuring 100BASE-TX Full Duplex
LED Indicators Link Status, Power, PoE Out, 10Mb or 100mb
Shipping Weight 2.0 lbs.
Mounting 0.20” Diameter (5.0mm)
Operating Temperature -40 to 75 degrees C/-40 to 167 degrees F
Environmental NEMA TS-2 (see spec sheet download)
Downloads