800-528-4343

ET1500UWS

The Nitek Etherstretch™ ET1500UWS Outdoor IP camera Network Extender-PoE Inserter with Surge protector is another of the IP Video Transmission Solutions from Nitek. The ET1500UWS Network Extender System Extends Network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow.

Description 

The Nitek Etherstretch™ ET1500UWS Outdoor IP camera Network Extender-PoE Inserter with Surge protector is another of the IP Video Transmission Solutions from Nitek. The ET1500UWS Network Extender System Extends Network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow.
The System includes a Transmitter, Surge Protector unit (IPPWR1) and a NEMA 4X/ IP66 rated enclosure to house the Transmitter and Surge units. Operates with ER8400U, ER8500U or ER16500U Receiver Unit (purchase separately). The system transmits IP devices over network category cables and can quickly turn any ordinary 4 pair category cable into a high speed network communication & PoE path.
When operating over UTP category cable, the network extender system can operate for distances of up to 600 meters (1968 feet) with the ER8400U, ER8500U or 16500U Receivers. The system requires very little installation time and absolutely no set up or configuration. The ET1500U Ethernet Extender Transmitter is transparent to the network and has no IP or MAC addressing. Simply connect your network devices to the network ports of the Transmitter and Receiver along with existing cabling and the system begins communicating. LED indicators show the status of network communication and PoE power.
When connected to a PoE switch, power from the switch is used as the power source for the connected ET1500UWS Transmitter. In applications where network switches are not PoE capable, an optional power Inserter (IP1054 sold separately) can be used to insert power to the ET1500UWS Transmitter. The power is sent from the Receiver over the UTP to the Transmitter. The Transmitter uses PoE as its power source and powers the connected PoE network device as well.

Features 

ET1500UW
• Supports 10/100 and PoE over category rated cables up to distances of 600 meters (1968 feet)
• Transmitter housed in a NEMA 4X rated enclosure for outdoor applications
• Fully transparent to the network
• Supports any network device, including mega-pixel technology IP cameras
• Easy to install, no set up required
• No MAC or IP addressing required
• LED indicators for network signals, link status and power
• Optional power supply can insert PoE power for non-PoE switches
• Ground loop isolation
• UL Listed IEC/UL 60950-1
• Designed to IP 65 of IEC 529 and NEMA 1, 2, 4, 4x, 12, and 13 Specifications
• Cover attaching screws are outside the sealing area, preventing ingress of moisture and dust
• Cover screws are M-4 Stainless Steel, Non-Magnetic and Fasten into threaded Brass Inserts
• Made in the U.S.A.

IPPWR1
• Heavy duty single point ground
• 1 picosecond clamping time
• Lifetime warranty
• Separate power protection for 12 or 24 VAC
• Will pass PoE+ power
• Made in the U.S.A.

Technical Specs 
 EL1500CWS
Receiver Unit Size 1.1″H x 1.6″W x 5.1″D
Enclosure Size 2.165″H x 5.74″W x 9.92″D
Power Requirements PoE or IP1054 PoE Inserter (48vdc @ 15.4watts)
Ethernet Connection [1] Auto Configuring 10 ? 100 RJ45 port
EtherStretch Link Connection [1] RJ45 Port
LED Indicators Link Status, Power, PoE Out, 10Mb or 100mb
Shipping Weight 2 lbs.
Mounting Two 3?8″ mounting slots
Operating Temperature -15 degrees to 75 degrees C / 0 degrees to 167 degrees F
Humidity Up to 85% non-condensing
Surge Suppression Unit Nitek Model IPPWR1
Downloads