800-528-4343

ER8400U

The Nitek Etherstretch™ ER8400U Ethernet multi-port Network Extender-Gigabit PoE Switch is a Wall Mount Receiver unit that operates with from 1 to 8 ET1500U Transmitter units (sold separately). The Etherstretch™ Network Extender System extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow.

Description 

The Nitek Etherstretch™ ER8400U Ethernet multi-port Network Extender-Gigabit PoE Switch is a Wall Mount Receiver unit that operates with from 1 to 8 ET1500U Transmitter units (sold separately). The Etherstretch™ Network Extender System extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow.
ER8400U IP ethernet Network Extender-PoE Inserter is another of the IP Video Transmission Solutions from Nitek that can quickly turn any ordinary 4 pair category network cables into a high speed network communication & PoE path. When operating over a 4 pair category network cable, extended distances of up to 600 meters (1968 feet) can be achieved. The ER8400U Ethernet Extender Receiver along with the ET1500U Transmitters require very little installation time & absolutely no set up or configuration. The system is transparent to the network and has no IP or MAC addressing. Simply connect your network devices to the network ports of the Transmitter and Receiver along with existing cabling and the system begins communicating. LED indicators show the status of network communication and PoE power. This Etherstretch™ solution allows for the utilization of existing UTP infrastructure to both transmit IP Network Devices and to power them over the network as well.
An internal power supply in the ER8400U Receiver provides PoE to the system.

Features 

• Transmits up to distances of 600 meters (1968 ft)
• Wall mounted multi-channel (8) Etherstretch solution
• Includes a built-in power source for all connected devices
• Gigabit output network connectivity
• Supports 10/100 over UTP (CAT5e / CAT6)cables
• Fully transparent to the network
• Supports any network device, including Mega pixel IP cameras
• Remotely powers PoE+ network devices
• Easy to install, no set up required
• No MAC or IP addressing required
• LED indicators for network signals, link status and power
• Built-in short circuit, over current and over voltage protection
• Supports IEEE802.3af (15.4W) and IEEE802.3at (25.5W)
• Ground loop isolation
• Made in the U.S.A.

Technical Specs 
  Unit Specifications
Network Output Port 1 RJ45 Connector at 1 Gigabit
Link Port(s) 8 RJ45 Connectors
Dimensions 10.6″ W x 10.6″ H x 4.0″ D
Operating Temperature 0° to 37° C (32° to 98.6° F)
Shipping Weight 10 lbs.
Shipping Dimensions 18″ W x 24″ H x 8.5″ D
Power Requirements IEC380 connector – 110-240VAC/50-60Hz/270Watt Max
LED Connectivity Indicators Link Status, Power, PoE Out, 10/100/1000Mb
Mounting Wall mounting
Humidity Range 0 to 95%, non-condensing
Power Output 204 watts Max.
Downloads