NITEK 32 Channel UTP Hub VH3200

Model

VH3200	Powered Card Cage

Description:

32 port powered video hub with built-in surge suppression and video detection. Systems operate with other Nitek UTP video equipment including, Video transceiver hubs, standard video balun transceivers, active transmitters, or any twisted pair equipped camera.

The VH3200 series UTP modular hub system holds up to four VB41x8, TR515x8 or TR560x8 8 channel video receiver cards in any combination, for a total of 32 input ports. The VB41x8 can be used on video runs up to 750 feet (225 meters). The TR515x8 can be used up to 1,500 feet (450 meters) with passive transmitters. The TR560x8 can be used up to 3,000 feet (900 meters) with passive transmitters and up to 6,000 feet (1,800 meters) with the NITEK TT560 active transmitter.

Features:

Quality video over ordinary twisted pair cable
Immunity to noise and interference
Built-in surge suppression on VB39 models
Passive devices - do not require power
Video & P/T/Z over a single pair (with “up-the-coax” systems)
M - version mounts directly to camera or video source
Weatherproof design
Easier to install than coax

Transceiver Unit
Size	1 RU x 6.0" (D)
Power Requirements	24 VAC @ 450mA (Wall transformer provided with unit)
Video Input	Balanced low voltage current loop
Video Output	1 Vpp composite video monochrome or color
Common Mode Rejection	>70dB
Video Format	RS170, NTSC, PAL, SECAM, CCIR (Color or B/W)
Twisted Pair Connection	Screw terminals providing balanced low voltage current loop
Operating Frequency	DC to 10 MHz
Temperature Range	-20 degrees C to +55 degrees C
Humidity Range	0 to 98% non-condensing
Enclosure Type	Standard 19" rack 1 RU in height
Wire Spec	26 to 12 AWG Unshielded Twisted Pair (UTP)
DC Loop Resistance	51 Ohms/1,000 feet (max) (51 Ohms/300 meters)
Normal Capacitance	17pF/ft.
Impedence	100 Ohms +/- 20%
UTP Category	2 or better

NITEK - VH3200 - Powered Card Cage

Product Specifications

VH3200 Spec	--	VH3200 dwg
VH3200 Manual	--	VH3200 Visio

Wire and Cable Recommendations

Twisted Sender is recommended for use with unshielded twisted pair (UTP) wiring. The systems will operate over wire gauges from 26 AWG through 12 AWG but are optimized for 24 AWG. Category cabling may be used. Individually shielded pairs should be avoided as they drastically reduce the operating range of the systems. Multi-pair cable with an overall shield is acceptable. Video can be operated in the same communication cable coexistent with telephone, computer, control signals, power voltages and other video signals. While video may be routed through telephone punch-down block terminals, any bridge-taps, also called T-taps and any resistive, capacitive or inductive devices MUST BE removed from the pair.

For more specific information regarding wire types, gauges and proper installation techniques, please call (800) 528-4343 for technical assistance.

Product Drawing

System Drawings

Live Chat