Description:
Power Supplies for the UTPLinks™ Video, Data & Power, Twisted Pair Transmission System

The PS105 Power Supply provides 5 Amps of current. Power is provided to the CX Model Crossover unit in the UTPLinks System for insertion and distribution to up to 16 fixed cameras by the CX Unit. The PS110 Power Supply performs the same functions as the PS105 except the PS110 provides 10 Amps of current, for fixed cameras and PTZ. The number of cameras and/or PTZ units that can be powered by either the PS105 or PS110 is dependent upon the current requirements of the equipment being powered. Contact NITEK Tech Support for information regarding specific PTZ equipment. The PS105 or PS110 can be located at a mid-span position; i.e. IDF closet or at the “Head-End”. These Power Supplies must be located in close proximity to the CX Units.

Features:

• Power is provided to cameras and PTZ units in a
  closed, self-contained system
• PS105 and PS110 Units mount in a 19" rack
• Easy to install and configure
• Designed to be compatible with “Structured
  Cabling” standards
• Video, data & power can be run in the same Cat 5
  cable without interference
  

System