Description:
The POE48 series 4 Channel PoE Crossover and Power Insertion Card is designed for use with the CX452 Modular Card Cage (purchase separately).

The POE48 crossover and power insertion card is a unique component of the UTPLinks system. The POE48 card can provide power for up to four PoE cameras. The POE48 also provides the means to connect the four IP cameras to a network device; i.e. hub, switch, etc. Up to five POE48 cards may be plugged into a CX452 chassis to power a total of twenty cameras, or any combination of In this way the UTPLinks system may be used to power and crossover both IP and standard analog cameras in the same structured cabling network. The CX452 is a 1 RU card cage which is powered from a separate PS110 power supply (purchase separately).

Features:

• The POE48 can be used in a combined system with
  standard UTPLinks plug-in cards
• Provides four separately fused outputs
• Interfaces with standard network devices
• Plug-in cards also provide future system ease of moves, adds and changes
• Detection LED’s for power
• TIA/EIA 568B compatible
• One Cat 5 or better cable per camera drop
  

System

Wire and Cable Recommendations

On horizontal runs with fixed IP cameras applications up to 4 watts/port, Cat 5 or better; For IP camera applications up to 6 watts/port, Cat 5 24 AWG or better is recommended. Multi-pair cable with an overall shield is acceptable. While signals may be routed through 66 blocks or 110 blocks, any bridge-taps, also called T-taps and any resistive, capacitive or inductive devices MUST BE removed from the pair.

For more specific information regarding wire types, gauges and proper installation techniques, please call 800-528-4343 for sale application assistance.