Description:
The CXM and CHM series crossover insertion
cards are designed for use with the CX452 modular
card cage (purchase separately). These units are
components of the Nitek UTPLinks video, data &
power twisted pair system.
The CXM and CHM crossover cards are unique
unshielded twisted pair (UTP) transmission products
designed to operate with TIA/EIA standards-based network
cabling. The cards plug into and are powered
through the CX452 modular card cage. The CX452 is a
1 RU card cage that holds up to 5 of the crossover insertion
cards. Power is supplied from a separate PS105
or PS110 power supply (purchase separately). The
crossover system and power supply are typically located
in an IDF (telecom) closet. There are four card models available and any of the four can be plugged into the card cage in any combination. Each card is designed to accommodate 4 cameras. The primary function of each of the cards is to provide a means of interfacing copper backbone cables to horizontal cable runs and inserting voltage to the individual camera and/or PTZ over the horizontal run. In addition, models of the cards are available that provide RS422 distribution and/or video transceivers (see available cards - under ordering information). Using a single standards-compliant 4-pair UTP category 5 or better cable, video, data and power can be sent up to 100 meters to a fixed or PTZ camera.
U.S. Patent No. 7,193,149
|
Features:
- Four available plug-in cards provide flexibility - any combination of four Crossover cards can be used in any of the CX452 card cage slots
- Plug-in cards also provide future system expansion or features modification
- Each of the cards cover 4 zones with separately
fused outputs
- One 4-pair Cat 5 cable can be used for video, RS422 and 24 VAC
- Detection LED’s for power (all cards) and
RS422 (CXM22 & CHM22)
- TIA/EIA 568B compatible
|
System
| Size |
1 horizontal card slot
(5 slots total CX452 card cage) |
| Power Requirements |
Supplied by PS105 or
PS110 Power Supply |
Twisted Pair
Connection
(vertical runs)
|
50 pin Telco connector providing balanced low voltage current loop
(Provided by CX452 card cage) |
Twisted Pair
Connection
(horizontal runs) |
RJ45 connector |
| Temperature Range |
0 degrees C to +55 degrees C |
| Humidity Range |
0 to 98%, non-condensing |
| Shipping Weight |
1 lbs |
Wire Spec |
26 to 12 AWG Unshielded
Twisted Pair (UTP) |
|
DC Loop Resistance |
51 Ohms/1,000 ft (max) |
|
Normal Capacitance |
17pF/ft. |
|
Impedence |
100 Ohms +/- 20% |
|
UTP Category |
2 or better |
|
|
|
| . |
|
|
| PART |
DESCRIPTION |
| CXM16 |
4 Channel Crossover & Power Insertion Card |
| CXM22 |
4 Channel Crossover, Power Insertion & RS422 Distribution Card |
| CHM16 |
4 Channel Crossover, Power Insertion & Video Card |
| CHM22 |
4 Channel Crossover, Power Insertion, RS422 Distribution & Video Card |
|
Wire and Cable Recommendations
On horizontal runs with fixed cameras (applications up to 8
watts/port) Cat 5 or better; 22 AWG or 24 AWG. For PTZ
camera (applications >8 watts/port) Cat 5 or better; 22 AWG is
recommended. In the case of backbone cable 24 AWG Cat 3 or
better is recommended. Multi-pair cable with an overall shield
is acceptable. While signals may be routed through 66 blocks
or 110 blocks, any bridge-taps, also called T-taps and any
resistive, capacitive or inductive devices MUST BE removed
from the pair.
For more specific information regarding wire types, gauges
and proper installation techniques, please call 800-528-4343
for sale application assistance.
|
|
