• Active electronics compensate for frequency and level loss
• Built-in protection from power surge, transients, static or other electrical interference
• High resolution color or monochrome video
• Complete immunity to ground loop; video and AC can be run in a common raceway, where allowed
• Video can be run in the same cable with telephone and computer signals
• Weatherproof design
• Easy to install

Applications:

• College Campuses - using existing communication cables saves time and money
• High Rise Buildings - between floors, through punch-down blocks
• Detention Facilities - twisted pair takes less space than coax in a conduit
• High Voltage Facilities - high immunity to AC power interference
• Parking Garages- where running coax is difficult to impossible
• Remote Gates - can be run in same cable with audio and gate control

Wire and Cable Recommendations

Twisted Sender is recommended for use with unshielded twisted pair (UTP) wiring. The systems will operate over wire gauges from 26 AWG through 12 AWG but are optimized for 24 AWG. Category 2, 3, 4 or 5 cable may be used. Individually shielded pairs should be avoided as they drastically reduce the operating range of the systems. Multi-pair cable with an overall shield is acceptable. Video can be operated in the same communication cable coexistent with telephone, computer, control signals, power voltages and other video signals. While video may be routed through telephone punch-down block terminals, any bridge-taps, also called T-taps and any resistive, capacitive or inductive devices MUST BE removed from the pair.

For more specific information regarding wire types, gauges and proper installation techniques, please call (800) 528-4343 for technical assistance.