4 Channel IP Crossover with PoE Insertion Card Component of the UTPLinks System

Model Number: POE48

  • 4 Channel IP Crossover with PoE Insertion Card
  • Component of the UTPLinks™ System


The POE48 series 4 channel PoE crossover and power insertion card is designed for use with the CX254 and the CX452 modular card cage (purchase separately).

The POE48 crossover and power insertion card is a unique component of the UTPLinks system. The POE48 card can provide power for up to four PoE cameras. The POE48 also provides the means to connect the four IP cameras to a network device; i.e. hub, switch, etc. Up to five POE48 cards may be plugged into a CX254 or the CX452 chassis to power a total of twenty cameras, or any combination of. In this way the UTPLinks system may be used to power and crossover both IP and standard analog cameras in the same structured cabling network. The CX254 and the CX452 are 1 RU card cages (purchase separately).

  • The POE48 can be used in a combined system with standard UTPLinks plug-in cards
  • Provides four separately fused outputs
  • Interfaces with standard network devices
  • Plug-in cards also provide future system ease of moves, adds and changes
  • Detection LEDs for power
  • TIA/EIA 568B compatible
  • One Cat 5 or better cable per camera drop

Wire and Cable Recommendations

On horizontal runs with fixed IP cameras applications up to 4 watts/port, Cat 5 or better; For IP camera applications up to 6 watts/port, Cat 5 24 AWG or better is recommended. Multi-pair cable with an overall shield is acceptable. While signals may be routed through 66 blocks or 110 blocks, any bridge-taps, also called T-taps and any resistive, capacitive or inductive devices MUST BE removed from the pair.


For more specific information regarding wire types, gauges and proper installation techniques, please call (800) 528-4343 for technical assistance.
 Unit Specifications
Size 1 horizontal card slot
(5 slots total CX452 card cage)
Power Requirements Supplied by PS115 power supply
Power Output 48VDC @ 15.4 WATTS/PORT
Twisted Pair Connection
(vertical runs)
RJ45 connector
Twisted Pair Connection
(horizontal runs)

RJ45 connector

 

UTP Cable Category 5 or better
Temperature Range 0 degrees C to +55 degrees C
Humidity Range 0 to 95%, non-condensing
Shipping Weight 1 lbs

RJ45 Connector "To Camera"
(Horizontal Run)

Pin
Color Code
Signal
1
WHT/ORG
Transmit (video) +
2
ORG/WHT
Transmit (video) -
3
WHT/GRN
Receive +
4
BLU/WHT
VDC +
5
WHT/BLU
VDC +
6
GRN/WHT
Receive -
7
WHT/BRN
VDC -
8
BRN/WHT
VDC -

RJ45 Connector "To Network"
(IP Interface)
Pin
Color Code
Signal
1
WHT/ORG
Transmit (video) +
2
ORG/WHT
Transmit (video) -
3
WHT/GRN
Receive +
4
BLU/WHT
VDC +
5
WHT/BLU
VDC +
6
GRN/WHT
Receive -
7
WHT/BRN
VDC -
8
BRN/WHT
VDC -

Select a type of online documentation:


Title
 
 
 
DOC
POE48 Specification Sheet
 
 
 
POE48 Installation Manual
 
 
 
POE48 A&E Specification
 
 
 
POE48 A&E Specification
 
 
 
POE48 Visio Drawing
 
 
 
POE48 Autocad Drawing