Nitek IP Camera Network Extender-PoE Inserter Solution - ET1500U
Etherstretch™

IP Camera Network Extender

Transmitter Unit:

Model ET1500U

  • IP Network Extender transmits over Category Cables up to 1,960 ft (500 meters)
  • Includes Transmitter unit only
  • Receives PoE from Receiver unit or PS48 Supply
  • Operates with ER8500U or ER16500U Receiver Unit
  • Transparent to the Network, no setup required
  • Environmentally Hardened to meet NEMA TS-2 Specifications

  • Etherstretch Toolkit


  • Use our Online Etherstretch™ Designer Toolkit



    The NITEK Etherstretch™ ET1500U IP Camera Extender Transmitter Unit is a network extender component. The ET1500U operates with either an ER8500U or ER16500U 8 or 16 Port IP Extender/Gigabit PoE Switch Receiver Unit, to form a multi-channel IP extender system that transmits IP cameras or other network devices well beyond standard network limitations. The Nitek Ethernet Extender Systems can turn standard network cables into a high speed network communication & PoE paths. When operating over category cables the network extender system can operate for distances of up to 600 meters (1,960 feet). The ET1500U Transmitter is part of a system that operates in conjunction with either an ER8500U Eight Port Receiver or ER16500U Sixteen Port Receiver (these receivers are sold separately). The system requires very little installation time & absolutely no set up or configuration. The ET1500U ethernet extender transmitter is transparent to the network and has no IP or MAC addressing. Simply connect your network devices to the network ports of the transmitter along with existing cabling and the system begins communicating. LED indicators show the status of network communication and PoE power.

    • Transmits up to distances of 600 meters ⁄ 1,960 feet
    • Supports PoE and network communications
    • Supports any network device, including IP cameras
    • Fully transparent to the network
    • Built-in surge protection
    • Easy to install, no set up required
    • No MAC or IP addressing required
    • LED indicators for network signals, link status and power
    • Optional power supply can insert POE power for non-POE switches
     Transceiver Unit
    Size 1.1"H x 1.6"W x 4.93"D
    Power Requirements PoE or PS48 Power Supply (48vdc @ 15.4watts)
    Ethernet Connection
    [1] Auto Configuring 10 ⁄ 100 RJ45 port
    EtherStretch Link Connection
    [1] RJ45 Port
    LED Indicators Link Status, Power, PoE Out, 10Mb or 100mb
    Shipping Weight 3 lbs.
    Mounting Two 3⁄8" mounting slots
    Operating Temperature -40 to 75 degrees C/-40 to 167 degrees F
    Environmental NEMA TS-2 (see spec sheet download)

    Select a type of online documentation:


    Title
     
     
     
    DOC
    ET1500U Specification Sheet
     
     
     
    ET1500U Installation Manual
     
     
     
    ET1500U A&E Specification
     
     
     
    ET1500U A&E Specification
     
     
     
    ET1500U Visio Drawing
     
     
     
    ET1500U Autocad Drawing
     
     
     
    Nema TS-2 Environmental Test Report