IP over Coax Transmission Solution - EL1500CW
Etherstretch™

IP Cameras Over Coax Extender

w/Weatherproof Transmitter:

Model EL1500CW

  • IP Network Extender transmits over coax up to 1,640 ft (500m)
  • Includes Receiver and Transmitter
  • Extends PoE to Transmitter and Ip Cameras or Network Devices
  • Transparent to the Network
  • No setup required
  • Environmentally Hardened to meet NEMA TS-2 Specifications
  • Patent Pending USA and Europe Euro Pat App 2779641


  • Etherstretch Toolkit


    Use our Online Etherstretch™ Designer Toolkit


    The Etherstretch™ EL1500CW Outdoor IP cameras over Coax network extender-PoE Inserter is another of the IP Video Transmission Solutions from NITEK. The System includes a receiver, transmitter, and a NEMA4X rated enclosure to house the transmitter unit. The system transmits IP cameras over coax and can quickly turn any ordinary RG59U coaxial cable into a high speed network communication & PoE path. When operating over RG59U coaxial cable, the coax network extender system can operate for distances of up to 500 meters (1,640 feet). The EL1500CW coax ethernet extender system consists of a weatherproof enclosure which houses the transmitter and also a receiver, which requires very little installation time & absolutely no set up or configuration. The The EL1500CW ethernet over coax network extenders transmitter and receiver are transparent to the network and have no IP or MAC addressing. Simply connect your network devices to the network ports of the transmitter and receiver along with existing cabling and the system begins communicating. LED indicators show the status of network communication and PoE power.

    When connected to a PoE switch, power from the switch is used as the power source for the connected EL1500CW receiver. In applications where network switches are not PoE capable, an optional power Inserter (IP1054 sold separately) can be used to insert power to the EL1500CW receiver. The power is sent from the receiver over the coax to the transmitter. The transmitter uses PoE as its power source and powers the connected PoE network device as well. The EL1500CW coax network extender system extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow.

    • NEMA4X Rated Enclosure to House Transmitter
    • Transmits up to distances of 500 meters ⁄ 1,640 feet
    • Supports PoE and network communications
    • Supports any network device, including IP cameras
    • Fully transparent to the network
    • Built-in surge protection
    • Easy to install, no set up required
    • No MAC or IP addressing required
    • LED indicators for network signals, link status and power
    • Optional power supply can insert POE power for non-POE switches
     EL1500CW
    Unit Size 1.1"H x 1.6"W x 4.93"D
    Enclosure Size 2.25"H x 4.76"W x 7.125"D
    Power Requirements PoE or IP1054 PoE Inserter (48vdc @ 15.4watts)
    Ethernet Connection
    [1] Auto Configuring 10 ⁄ 100 RJ45 port
    EtherStretch Link Connection
    [1] Coaxial BNC Connector
    LED Indicators Link Status, Power, PoE Out, 10Mb or 100mb
    Shipping Weight 5 lbs.
    Mounting Two 3⁄8" mounting slots
    Operating Temperature 0 - 140 F Fahrenheit
    Humidity Up to 85% non-condensing

    Select a type of online documentation:


    Title
     
     
     
    DOC
    EL1500CW Specification Sheet
     
     
     
    EL1500CW Installation Manual
     
     
     
    EL1500CW A&E Specification
     
     
     
    EL1500CW A&E Specification
     
     
     
    EL1500CW Visio Drawing
     
     
     
    EL1500CW Autocad Drawing
     
     
     
    Nema TS-2 Environmental Test Report