PRODUCTS ▬ PoE Inserters

PoE Inserters

Nitek’s power over Ethernet inserters allow security application to be completed that require network devices and power in areas or locations where PoE might not typically be avalible.

PoE & Ethernet Repeater

EE328

Using power over Ethernet technology the EE328 allows installers to overcome network limitations by extending PoE and Network transmission as an inline repeater.

PoE Injector

IP1054

The IP1054 single port power over Ethernet inserter is another addition to the industrial networking solutions offered by Nitek. The IP1054 accepts data transmission from the network, while connecting to the IP device transmitting power over Ethernet and network data.

Multi Channel PoE Injector

IP1648

The IP1648 series of rack mount mid span POE power sources are used for supplying POE and data to multiple devices from a central location such as an operations room. The POE devices feature a separate data-in port coupled with a data out/POE port. The POE function is fully IEEE802.3af compliant.

Managed Midspan PoE Injector

IP1648M

The IP1648M is a managed sixteen port mid-span power supply for PoE compliant cameras and edge devices. The 19 inch 1U EIA rack mount chassis may be rack or shelf mounted.

PoE Injector

IPT148

The IPT148 can be used to test the installation of PoE equipment with or without a PoE network.

48 Volt PoE Supply

PS48

The IPT148 power supply can be used with several of the Nitek 48 VDC items such as the IPT148 and the EE328. The PS148 is a 48VDC 1 amp power supply.